66% Zinc Oxide Dispersion

  • Industry
    • Coatings & Adhesives
    • Gloves
    • Rubber
  • Region
    • EMEA
    • NA
  • Application & Dosage

      Since performance is dependent on actual formulation techniques and systems used, we advise this should be independently verified for each application.

A stable, high solid content aqueous dispersion containing 66% w/w Zinc Oxide, used as an activator in sulphur vulcanisation of natural latices and synthetic elastomers. An important stabiliser in the formulation of water based replacements for solvented contact adhesives. Zinc oxide is also utilised as a preservative and filler in wood and paper applications.

Product Features

  • High solids content
  • Fine particle size
  • Highly effective activator in natural latices, rubbers and synthetic elastomer systems
  • Low colour inorganic pigment filler
  • Preservative in wood and paper processing
  • UV absorber at wavelengths below 360 nm

Typical Properties

68 Total Solids (%)
66 Active Solids (%)
3000 Viscosity (RV) (cPs)
10.0 pH
2.20 Specific Gravity
1 Particle Size (micron)